News items

In January TMS delivered the hydraulic cylinders for several jack up pontoons. These are pontoons can be lifted completely out of the water at sea by […]

TMS developed and delivered a new hydraulic crane for a new built dry dock in Zeebrugge. The reach of the crane is 33 meter, with a […]

TMS has been commissioned to design and build a so-called dry sand ship unloader. This is an installation to unload a self-propelled hopper suction dredger. The […]

For a new cutter dredger series TMS developed and delivered new type column deck cranes. Last month the first column deck crane of a serie of […]

TMS has designed and produced mono pile plugs for a new offshore wind project. The plugs are designed for the floating transportation of mono piles, with […]

TMS has designed and manufactured three new echoscope cranes for survey work on a cable lay vessels. Various survey tools can be mounted on these hydraulically […]

The first mono pole with the new Ø6800 and Ø6500 TMS pole plugs has been successfully launched. This allows the construction of the new wind farm […]

TMS has developed a new tool, a so called Jetting Airlift Tool (JAT) for dredging the inside of a monopile. The total installation weighs about 105 […]

The Jetting Airlift Tool is fully assembled and delivered to our customer. Our client will use this tool as a backup for placing monopiles for an […]

TMS has purchased a Liebherr MTC2600 crane. This 2600 tonmeter – 100 ton offshore pedestal crane with only 1400 running hours has been transported to TMS […]

All monopiles for the offshore wind project for which TMS has supplied pile plugs have been successfully transported and upended installed at the desired location in […]

The by TMS designed dry sand ship unloader is fully assembled and delivered to our customer. At this moment, the final finishing touches are being completed […]

The dry sand ship unloader developed and built by TMS has been completed and commissioned. The installation is now mounted on the ship, with which the […]

The TMS designed and recently purchased Backacter dipper dredger crane parts were recently transported to the TMS storage location in Werkendam. These parts will be used […]

TMS designed and calculated a special excavator undercarriage gantry for a project on the Afsluitdijk. This undercarriage is designed to work with the excavator horizontal and […]

TMS has built a new sweeping arm crane that is used on a multifunctional ship that can also be used for oil fighting at sea. This […]

For a new project, our TMS rental pile cutting tool has been converted to cut a wind turbine foundation pipe with a diameter of 4.3m and […]

TMS has designed and built and tested 2 new pile cofferdams to be able to work on piles below water level. These will soon be used […]

TMS has developed and delivered a new cargo crane. This crane has a reach of 21 meters with a WLL of 25t. This crane will be […]

The hose reels developed & assembled by TMS have been delivered. The hose reels, built entirely under DNV approval, have a capacity of 180 m of […]

Last week a monopole plug was transported to our customer. The transported plug is a combined plug, towing arrangement, up-end and lifting tools with a WLL […]

TMS got order for design and manufacturing of a stern ramp. This stern ramp with a size of 13,8×10 m, will be placed on a ship […]

TMS has delivered modifications for the bow lifting cranes of an existing ship. In order to increase headroom below lifted Bow with 3 meter till 15 […]

For a new project, TMS has developed and built 2 new oil skimmer cranes for ATEX zone 1, These will be deployed on a multifunctional ship […]

Last weeks the TMS built and upgraded Anode Cage Installation Aid (ACIA) and lifting spreader was transported to clients yard and succesfully load tested. The tool […]

TMS offers: Liebherr MTC 2600-100 Offshore Crane Year of construction 10-2008, commissioning 03-2009, in use until 06-2012 Only 1446 engine running hours 100t-12 meters / 50 […]

After a succesful project TMS returned the Mono Pile plugs and lifting tools back to TMS and unloaded the barge and placed them in the storage […]

For a new project, our TMS rental subsea pile cutting tool has been converted to cut a pipes with a diameter of 6.1m. Among other things, […]

TMS developed and supplied several sea fastening frames used for supporting offshore installation tool during sailing and transit situations. The sea fastening frames are able to […]

TMS has installed the new frequency controlled all-electric traveling dock cranes on the floating dry dock. The dry dock cranes are equipped with three winches with […]

TMS has been developing and supplying steel crane mats as an alternative to the hardwood Azobe crane mats for many years. Last week, another new set […]

TMS is proud to deliver a Casing Gripper and Casing Cutting Tool to New Waves Solutions, a subsidiary of the DEME Group. Both tools will be […]

For a new project, TMS has developed and built 6 new oil skimmer cranes for ATEX zone 1, These will be deployed on a multifunctional ship […]

The J-tube & boatlanding installation tool (JBIT) designed and built by TMS has successfully completed its first campaign, on an offshore wind project in the USA. […]

The TMS rental underwater pile cutting tool has successfully cut the first pipes at the new project site. The TMS cutting tool is used at this […]

The hose reels developed & assembled by TMS have been delivered. The hose reels, built entirely under DNV approval, have a capacity of 180 m of […]

The Monopile Drilling, Installation and Grouting Aid (MODIGA) designed and built by TMS in 2021, has been converted for use on a new project following a […]

The ship loading cranes designed and built by TMS have been successfully delivered and mounted on the ship. These ship loader cranes will be used for […]